CW7433-WG is inflammable.
HOW TO USEThe usage of CW7433-WG is very simple.
Just pour it into the Glue Supply Box (Devise) of your wefting machine
such as our CW433-3H
(Wefting System PRO1) .
Please check each time when you start
to work with your wefting machine in order to know
if the glue ( remaining in the glue supply box) is properly sticky.
Please note the glue in the glue supply box or in any container must become solid as times goes. So, to save it, please close up all openings of the glue supply box or/and the container so that the solvent can not vaporize.
HOW TO CLEAN
After wefting work, please remove the glue-residue from the glue supply
box of your wefting machine by using MEK, ACETONE, TOLUENE, ALCOHOL, OR
THE THINNER OF PAINT. THEY ARE ALL VERY INFLAMMABLE & DANGEROUS SOLVENTS.
KEEP IT FAR FROM HEAT, FIRE, AND KEEP GOOD AIR VENTILATION. YOU SHOULD
USE A GAS MASK AND RUBBER-GLOVES.
When the glue gets on your hand, you can
remove it with Alcohol ( medical grade) and
wash your hands with warm water for some minutes at least .
CAUTION
* INFLAMMABLE
* Keep out of fire, heat, and sun-shine.
* For PROFESSIONAL USE or WIG FACTORY USE only, not for retail
* Store at below 30 Degree C.(90 Degree F.)
< 5 ~ 15 Degree C. (40 ~ 60 Degree F.) is the best. >
* Close the cap tightly and quickly after opening.
Otherwise, it become thicker.
* Keep out of eyes, skin
* Keep away from children
* Use the Wefting Glues with gloves and goggles for safety
* If the glues get on hands, please pour water on it and remove
by rubbing with a cloth. You can use Alcohol ( medical grade).
* Do not breathe fumes.
* Please get medical attention for eye of internal contact.
* Please use with ADEQUATE VENTILATION for SAFETY and WELL-DRYING.
Please make CARE-LABELS saying above caution in your
language and attach it
to the both sides of the container of our glues for the safety of you
and your workers.
